PB38 ENCLOSED BULLET FIXTURE > PAR38 Incandescent & H.I.D.
 
MAXIMUM LAMPINGS APPLICATIONS Click Photos to Enlarge. DIMENSIONS

 150W PAR38 Incandescent

 100W PAR38 Metal Halide

 100W ED17 Metal Halide

 100W ED17 High Pressure
                   Sodium

- Landscape -

- Security -

- Spot -

- Accent - 


W/ REFLECTOR
VISOR

Length with Hood:
9-5/8 inches

Length with Visor:
14-1/8"

Diameter (with Visor or Hood):  5-1/8 inches

NO REFLECTOR
HOOD


DESCRIPTION:  This is your classic PAR38 enclosed bullet-shaped fixture used for flood/spot lighting in many applications.  Choose either a Hood or Visor, either of which provides some degree of glare control.  Lamp with either PAR38 Incandescent, PAR38 Metal Halide, ED17 Metal Halide/High Pressure Sodium.  The H.I.D. lamps will require a remote ballast.
 

MODEL CODE LEGEND (Choose one Code from each column.)
MODEL

REFLECTOR

EXTENSION TYPE

 FINISH
PB38  HS = No Reflector
 HL = Aluminum Reflector 		 H = Hood
V = Visor		 WH = White
BK = Black
 
EXAMPLES OF COMPLETE ORDERING CODES:
PB38-HS-H-BK PB38-HL-V-WH
Add Accessory Codes to end of Fixture Ordering Code.
 

STOCK SPECIFICATIONS
 SAFETY LISTING  CSA Listed as Suitable for Wet Locations.
 HOUSING  Die Cast Aluminum with Chromate Coating.  Weep holes on bottom.
 REFLECTOR  HL = Aluminum.  Use with non-reflector type H.I.D. lamps. 
 HS = No Reflector.  Use  with PAR reflector type Incandescent or H.I.D. lamps.
 HOOD WITH LENS

 Die Cast Aluminum.  1-5/8 inches length.  5-1/8 inches diameter.  Inserts into Housing with friction fit
 of o-ring.  Secured by Thumb Screw.  Has 4 weep holes positioned 90 degrees from each other.  Clear
 flat glass with silicone seal.

 VISOR WITH LENS  Die Cast Aluminum.  Tapered.  6-1/8 inches length.  5-1/8 inches diameter.  Inserts into Housing with
 friction fit of o-ring.  Secured by Thumb Screw.  Has 4 weep holes positioned 90 degrees from each
 other.  Clear flat glass with silicone seal.
 SWIVEL  Adjustable; 1/2" NPT. 
 LAMPHOLDER  Medium Base.  Porcelain 4KV pulse rated.
 LAMP  Not included.
 BALLAST  Incandescent Lampings:  Not needed.
 H.I.D. Lampings:  Remote.  Not included.   
 FIXTURE FINISH  Polyester Powder Paint: White (WH) or Black (BK).
 ACCESSORIES
 		  Grille (PB38-G)  Post Top Fitter (FL-PTF)  Ballast Kits (Various H.I.D.
 sizes.)
 Ground Stake (FL-STK)  Remote Ballast Box (GB-4)
 PHOTOMETRICS  Selected Models available via e-mail in .pdf format and/or .ies format.   Contact us with your request.
 WAREHOUSE  Tampa FL - Cerritos CA - Walden NY - Vancouver WA.


Kelsey-Kane Lighting Mfg. Co.
4541 NE 11th Avenue, Fort Lauderdale, Florida 33334 USA
Phone:  954-772-3187, Fax:  954-772-8468
e-mail:  info@kelsey-kane.com