ROPE LIGHT > LED > UL Listed > Design Tips
 

1.     Remember, that in order to maintain the UL Listing of this product, it may not be altered in any way.  For example, the rope may not be resized or repaired.  The plug must connect to a receptacle and may not be cut off for hard-wiring purposes.

2.    Using mounting clips allows greater light output than using mounting channel.  Mounting channel wraps around approximately two-thirds of the circumference of the rope and diffuses the light produced.

3.    Just like any UV stabilized plastic, the PVC used in rope light is susceptible to some deterioration when exposed to direct sunlight over an extended period of time.

4.    Rope light produces heat just like any lighting fixture.  Even though you can hold it in your hands when illuminated, it needs to "breathe" and should not be "bottled up" for safety reasons.  For instance, do not bury it in carpeting, silicone adhesive or caulking.  Use channel, clips or tie wraps whenever possible.

5.    This product is not dimmable.

6.    Do not use in or around pools, spas or other water applications.

7.    Do not stretch beyond its' normal length.  This may damage the wiring inside the tubing.  For example,  when wrapping a tree trunk or branch of a tree, be sure to allow some slack for the movement of the trunk or branch due to wind.

8.   In situations where weight is a factor, Duralight (1/2" diameter) weighs 1.87 ounces per foot.