ROPE LIGHT > LED > Non-UL > Accessories & Parts
 

MOUNTING CLIPS FOR 1/2" DIAMETER ROPE LIGHT
 SPECIFICATIONS:  Clear Plastic.  Suitable for Indoor use or temporary Outdoor use.
 BENEFITS:  Holds Rope Light in any position (straight or otherwise). 
 Attach with brads or screws (by others.)
 ORDER CODES:  DL-5 (1/2" Diameter)
 Click Photo to Enlarge.

MOUNTING CHANNEL
 SPECIFICATIONS:  Rigid Plastic, U-Shaped.  Suitable for Indoor or Outdoor use. Sold in 4 ft.
 lengths only.  Cut to size with hack saw.  Adhere with screws (drill your own
 holes), adhesive or double-faced tape (by others).

 BENEFITS:  Maintains straight line.
 ORDER CODES:  DL-CH-4 (1/2" Diameter). 
 Click Photo to Enlarge.

REGULAR SPLICE CONNECTOR
 SPECIFICATIONS:  Will not fit into Mounting Channel.  White plastic wafer holds two sets of barbs
 to connect to two lengths of Rope Light.  Wafer and barbs are covered with  
 threaded plastic sleeve.  Strain relief fittings secure the connection.
 BENEFITS:  Connects two lengths of rope light.
 ORDER CODES:  DL-2W-3 (1/2" Diameter, 2-Wire).
 Click Photo to Enlarge.

INVISIBLE SPLICE CONNECTOR
 SPECIFICATIONS:  For use with Rope Light that is mounted in Channel.  White plastic wafer holds
 two sets of barbs to connect to Rope Light.  Seal with heat shrink and silicone
 when using outdoors.
 BENEFITS:  Connects two lengths of rope light.
 ORDER CODES:  DL-2W-7 (1/2" Diameter, 2-Wire).
 Click Photo to Enlarge.

"T" CONNECTOR
 SPECIFICATIONS:  White Plastic suitable for Indoor or Outdoor use.  Seal connections with
 silicone when using outdoors.  Each leg has barbs to connect to the Rope
 Light.  Strain relief fittings secure the Rope Light.
 BENEFITS:  Connects three lengths of rope light in a "T" configuration. 
 Will not accept a Power Cord.
 ORDER CODES:  DL-2W-T (1/2" Diameter, 2-Wire).
 Click Photo to Enlarge.

PHOTO
NOT
AVAILABLE

POWER SET-UP
 SPECIFICATIONS:  Consists of a Power Cord with In-Line Converter, Power Connector and
 End Cap:
 
 Power Cord:  White, 2-Wire Stranded SJ Cord with In-Line Power Converter.  
 5 Ft. Length.  120V version has 2-prong molded fused Plug. 12V Low voltage
 version is without Plug.  Non-UL.
 
 Power Connector: White Plastic wafer has barbs on one side to connect to
 rope light and pins on the other side to connect to a Power Cord.  Wafer is
 covered with White Plastic sleeve with threads on both ends to hold strain
 relief fittings.  Non-UL.

 End Cap:  Clear Plastic.  Friction fit to rope lighting.  Non-UL.
 BENEFITS:  These three items are needed to illuminate a section of rope light.
 ORDER CODES:  DL-LED-(Voltage)-PSU (1/2" Diameter, 2-Wire)..


 






 







 















 

























 


 Top of Page

Kelsey-Kane Lighting Mfg. Co.
4541 NE 11th Avenue, Fort Lauderdale, Florida 33334 USA
Phone:  954-772-3187, Fax:  954-772-8468
e-mail:  info@kelsey-kane.com