TGL40 GARAGE LIGHTER SERIES > Vandal-Resistant > Electronic Pulse Start Metal Halide & Induction
 
MAXIMUM WATTAGE APPLICATIONS Click Photo to Enlarge. DIMENSIONS

Electronic Pulse Start Metal Halide:  200W

Induction:  120W


- Garages -

- Cold Storage -

- Low Bay Applications -
 

 
Diameter (Ballast Housing):  15 inches

Height (Top of Housing to Bottom
of Drop Lens):  12-inches 
  


DESCRIPTION:  This Vandal-Resistant fixture may be outfitted with electronic Pulse Start Metal Halide or Induction.  This fixture is ideal for parking garages or cold storage.  It is designed to be flush mounted on a ceiling with our easy-hang mounting bracket which fits a standard 4-inch electrical box and allows installation by one person with two hands free for wiring connections.  The round, hinged, die cast aluminum housing with built-in heat sinks is designed with electronic ballasts in mind.
 

MODEL CODE (Partial)
See Legend below
to complete code.

LAMP & BALLAST DATA
LAMP
TYPE		 LAMP
BASE		 WATTS INITIAL
LUMENS*		 LAMP
HOURS*		 CRI* VOLTS BALLAST / DRIVER
 TGL40-P150-E

Pulse Start Metal Halide

Medium

 150 14,000

15,000

 65 120 to 277 Electronic
 TGL40-P200-E 200 19,000
 TGL40-I40-U 

Induction
(Round)

Support
Brackets

 40 2,800**

100,000

 80 Universal:
120 to 277
 TGL40-I80-U  80 6,400**
 TGL40-I100 100 8,000** Voltage
Specific:
120, 208,
240 or 277.
 TGL40-I120-U 120 9,600** Universal:
120 to 277


*Initial Lumens, Lamp Hours and CRI may vary from one lamp manufacturer to another.  Also, this data is for the most  commonly used types of these lamps.  Some lamp manufacturers also offer High Pressure Sodium and Metal Halide lamps in versions that are more environmentally friendly, have improved Color Rending (CRI), or have coated envelopes.  See our Industry Links  page to find the websites of major lamp manufacturers for detailed information.
 **It is commonly estimated in the lighting industry that Induction Lighting will replace approximately twice it's wattage of Metal Halide.  For example, the light output of 100W of Induction equates to approximately 200W of Metal Halide.
 

MODEL CODE LEGEND (Choose one Code from each column.)
MODEL LAMP TYPE WATTS BALLAST / DRIVER VOLTS FINISH LAMP
TGL40  P = Pulse Start
       Metal Halide		 150, 200.

 E = Electronic 120 to 277.

 Leave
Blank.		 BZ = Bronze

 L = Lamp
       Included.  
 Leave Blank
 if not required.
 I = Induction (Round) 40, 80, 120.  U = 120V to 277V Universal 
       (Multi-Volt) Electronic

  5 = 5000K
100

 Electronic (Leave Blank).
 Voltage Specific.

 120, 208,
240 or 277.

 
EXAMPLES OF COMPLETE ORDERING CODES:
TGL40-I120-U-BZ-5 TGL40-P200-E-BZ-L
Add Accessory Codes to end of Fixture Ordering Code.

 

STOCK SPECIFICATIONS (Click Links for details.)
 SAFETY LISTING  CSA Listed as Suitable for Wet Locations.
 BALLAST HOUSING
 		  Die Cast Aluminum with Chromate Conversion Coating for enhanced durability.
 Hinged.  Built-in heat sinks with electronic ballasts in mind.
 DROP LENS

 Heat-Resistant, Vandal-Resistant, Clear, Prismatic Polycarbonate.
 LENS GASKETING  Silicone.

 REFLECTOR

 Steel, powder coated white.
 MOUNTING BRACKET
 ( Click Photo to
   Enlarge. )

 

 
 Easy-hang mounting bracket fits a standard
 4-inch electrical box and allows installation by
 one person with two hands free for wiring
 connections.
 LAMP
 		  Pulse Start Metal Halide:  Optional.
 Induction:  Included.
 LAMPHOLDERS
 		  Pulse Start Metal Halide: Porcelain 4KV pulse rated medium base with nickel-plated screw shell. 
 Induction:  Support Brackets.
 HOUSING FINISH  Polyester Powder Paint.  Bronze stocked.  Custom colors available.
 ACCESSORIES

 Single Fusing (SF)

  Double Fusing (DF) 
 PHOTOMETRICS

 Selected Models available via e-mail in .pdf format and/or .ies format. Contact us with your request.
 WAREHOUSES  Tampa FL - Cerritos CA - Walden NY - Vancouver WA - Memphis TN.


Notes:

1.  If you require a fixture with a voltage, lamp or ballast not listed above, please contact us.
2.  To print this page in typical Portrait View, Click on FILE > PRINT PREVIEW.  In the drop boxes at the top of the screen, select ONLY THE FRAME SELECTED and SHRINK TO FIT.  This will eliminate the website page header and slightly shrink the margins so that everything on the page(s) will print.  Each operating system has it's own way of accomplishing this.   

Top of Page

Kelsey-Kane Lighting Mfg. Co.
4541 NE 11th Avenue, Fort Lauderdale, Florida 33334 USA
Phone:  954-772-3187, Fax:  954-772-8468
e-mail:  info@kelsey-kane.com