VN30 SERIES > Vandal-Resistant > H.I.D., Fluorescent & LED
 
MAXIMUM WATTAGE APPLICATIONS Click Photo to Enlarge. DIMENSIONS

High Pressure Sodium: 70W

Metal Halide:  70W

Compact Fluorescent:  42W

LED:  1 X 7.5W

-Outdoor Halls-

-Entrances-

 Width:  9 inches

 Height:  9 inches

 Depth:  7-1/4 inches

DESCRIPTION:  These are the smaller versions of the VN40 and VN41 surface-mounted squares we offer.  These fixtures may be flush mounted on walls or ceilings.  The 1-Light Fluorescent Models feature an electronic ballast and lampholder that will operate a 26W Quad-Tube or 32W Triple Twin-Tube CFL lamp.
 

MODEL CODE (Partial)
See Legend below
to complete code.

LAMP & BALLAST DATA
LAMP
TYPE		 LAMP
BASE		 WATTS INITIAL
LUMENS*		 LAMP
HOURS*		 CRI* VOLTS BALLAST / DRIVER
 VN30-H35-R120

High
Pressure
Sodium

Medium

 35 2,250

16,000+

 22

120V

Magnetic
Reactor NPF
 VN30-H50-R120 50 4,000

24,000+
 VN30-H70-R120 70 6,300
 VN30-M50-D

Metal
Halide

 50 3,200

6,000

65

Dual-Tap:
120 or 277.

Magnetic
HX-HPF
 VN30-M70-Q 70 5,000

10,000

Quad-Tap:
120, 208,
240, 277.
 VN30H-F26-E

Compact
Fluorescent

G24d-3

 26 1,800 82

120 to 277
Multi-Volt

Electronic HPF
 VN30H-F32-E GX24q-3 32 2,400
 VN30H-F42-E GX24q-4 42 3,200
 VN30-L1X7H-Q LED Module Support
Bracket		 1 X 7.5 500** 50,000 80 120 to 277
Multi-Volt		 Electronic
Driver

*Initial Lumens, Lamp Hours and CRI may vary from one lamp manufacturer to another.  Also, this data is for the most  commonly used types of these lamps.  Some lamp manufacturers also offer High Pressure Sodium and Metal Halide lamps in versions that are more environmentally friendly, have improved Color Rending (CRI), or have coated envelopes.  See our Industry Links  page to find the websites of major lamp manufacturers for detailed information.
**Each 7.5W LED module equates to approximately 50W of Metal Halide.
 

MODEL CODE LEGEND (Choose one Code from each column.)
MODEL LAMP TYPE WATTS BALLAST / DRIVER VOLTS LENS FINISH LAMP
VN30  H = High
       Pressure
       Sodium		 35, 50, 70.  R = Magnetic Reactor
       NPF		 120 CL = Clear

WH = White		 BZ = Bronze

 L = Lamp
       Included.
  
 Leave Blank
 if not
 required.
50  D = Dual-Tap Magnetic
       HX-HPF		 120 or 277.
70  Q = Quad-Tap Magnetic
       HX-HPF		 120, 208,
240 or 277.
 M = Metal Halide 50  D = Dual-Tap Magnetic
       HX-HPF		 120 or 277.
70  Q = Quad-Tap Magnetic
       HX-HPF		 120, 208,
240 or 277.
 HF = Compact
       Fluorescent		 26, 32, 42.  E = 120 to 277 Multi-Volt 
       Electronic HPF		 Leave blank.
 L = LED Module 1X7H  Q = 120 to 277 Multi-Volt
        Electronic Driver

 2 = 2700K
 3 = 3000K
 4 = 4000K
 
EXAMPLES OF COMPLETE ORDERING CODES:
VN30-H50-R120-CL-BZ-L VN30-M70-Q277-WH-BZ  VN30-F26-E-WH-BZ-L VN30-L1X7H-Q-CL-BZ-4
Add Accessory Codes to end of Fixture Ordering Code.
 

STOCK SPECIFICATIONS (Click Links for details.)
 SAFETY LISTING  CSA Listed as Suitable for Wet Locations.
 HOUSING  Die Cast Aluminum with Chromate Conversion Coating for enhanced durability.
 LENS

 Heat-resistant Clear (CL) or White (WH) Polycarbonate Refractor with UV Inhibitors.
 LENS GASKETING  Silicone.

 REFLECTOR

  Steel, painted White.
 LAMPHOLDERS  H.I.D.:  Porcelain 4KV pulse rated medium base with nickel-plated screw shell.
 Compact Fluorescent:  Plug-in type.   Accepts 26W, 32W and 42W lamps.
 LAMPS  H.I.D. & Compact Fluorescent:  Optional.
 LED MODULE



 		  Die Cast Aluminum.  IP66 (Total Ingress Protection against Dust.  Protected Ingress against strong
 jets of water.  Overall excellent weatherproof protection.) Choice of 2700K, 3000K, 4000K Color
 Temperature.  No mercury or lead.  Extremely low IR (Infrared Heat Radiation) and UV (Ultraviolet
 Radiation) in beam.   As for light output, a 7.5W LED module equates to approximately 50W of Metal
 Halide.  
 COIN PLUGS 1/2"  On two sides and back to accept conduit or Photocell.  
 MOUNTING  Mount directly over a recessed electrical box or use 1/2" surface conduit.
 HOUSING FINISH  Bronze (BZ) Polyester Powder Paint.  Custom colors are available.
 ACCESSORIES  120V Photocell - Field Installed (PC1)  208V to 277V Photocell - Field Installed (PC2)
 Single Fuse (SF)  Double Fuse (DF)
 120V to 277V Emergency Compact Fluorescent Battery Backup (3EB120277)
 PHOTOMETRICS  Selected Models available via e-mail in .pdf format and/or .ies format.  Contact us with your request.
 WAREHOUSES  Tampa FL - Cerritos CA - Walden NY - Vancouver WA - Memphis TN.


Notes:

1.  If you require a fixture with a voltage, lamp or ballast not listed above, please contact us.
2.  To print this page in typical Portrait View, Click on FILE > PRINT PREVIEW.  In the drop boxes at the top of the screen, select ONLY THE FRAME SELECTED and SHRINK TO FIT.  This will eliminate the website page header and slightly shrink the margins so that everything on the page(s) will print.  Each operating system has it's own way of accomplishing this.   

Top of Page

Kelsey-Kane Lighting Mfg. Co.
4541 NE 11th Avenue, Fort Lauderdale, Florida 33334 USA
Phone:  954-772-3187, Fax:  954-772-8468
e-mail:  info@kelsey-kane.com