WP15 SERIES:  MEDIUM WALL PACKS > H.I.D., Compact Fluorescent, Induction & LED
 
MAXIMUM WATTAGE APPLICATIONS Click Photo to Enlarge. DIMENSIONS

High Pressure Sodium: 150W

Metal Halide:  100W

Pulse Start Metal Halide:  150W

Compact Fluorescent:  2 X 42W

Induction:  40W

LED:  2 X 15W

- Security -

-Perimeter-

Height:  9 inches

Width:  14-1/4 inches

Depth:  7-1/4 inches


DESCRIPTION:  These are the mid-size weatherproof Wall Packs we offer. The 1-Light Fluorescent Models feature an electronic ballast and lampholder that will operate a 26W Quad-Tube, 32W Triple Twin-Tube or 42W Triple Twin-Tube CFL lamp.  2-Light Fluorescent Models have an electronic ballast and lampholders that will operate (2) 26W Quad-Tube, (2) 32W Triple Twin-Tube or (2) 42W Triple Twin-Tube CFL lamps. This type of fixture is widely used as exterior perimeter lighting on commercial buildings.  Add a Photocell or Emergency Battery Pack. 
 

MODEL CODE(Partial)
See Legend below
to complete code.

LAMP & BALLAST DATA
LAMP
TYPE		 LAMP
BASE		 WATTS INITIAL
LUMENS*		 LAMP
HOURS*		 CRI* VOLTS BALLAST/
DRIVER
TYPE
 WP15-H35-R120

High
Pressure
Sodium

Medium

 35

2,250

24,000+

 22

120

Magnetic
Reactor
NPF
 WP15-H50-R120 50 4,000
 WP15-H70-R120 70 6,300
 WP15-H100-R120 100 9,500
 WP15-H150-R120 150 16,000
 WP15-H50-Q 50 4,000

 Quad-Tap:
 120, 208,
 240, 277.

(277 is
the default
voltage.)

Magnetic
HX-HPF
 WP15-H70-Q 70 6,300
 WP15-H100-Q 100 9,500
 WP15-H150-Q 150 16,000
 WP15-M50-Q

Metal
Halide

 50 3,200 10,000 65
 WP15-M70-Q 70 5,000
 WP15-M100-Q

Medium
or Mogul

 100 7,800
 WP15-P150-Q 

Pulse Start
Metal Halide

 150 14,000 15,000
 WP15-F26-E

(1) Compact Fluorescent
T4 4-Pin

 G24d-3 26 1,800 10,000 82 120 to 277
Multi-Volt

 Electronic
HPF
 WP15-F32-E GX24q-3 32 2,400
 WP15-F42-E GX24q-4 42 3,200
 WP15-F52-E

(2) Compact Fluorescent
T4 4-Pin

 G24d-3 2 X 26 3,600
 WP15-F64-E GX24q-3 2 X 32 4,800
 WP15-F84-E GX24q-4 2 X 42 6,400
 WP15-I40-U

Induction
(Rectangular)

 Support
Bracket(s)		 40 2,800** 100,000 80+ Universal:
 120 to 277.

Electronic
 WP15-L1X7H-Q

(1) LED Module

 1 X 7.5 500*** 50,000 80 120 to 277
Multi-Volt

 Electronic
Driver
 WP15-L2X7H-Q

(2) LED Modules

 2 X 7.5 700***
 WP15-L1X15-Q

(1) LED Module

 1 X 15 1,000***
 WP15-L2X15-Q

(2) LED Modules

 2 X 15 1,400***


*Initial Lumens, Lamp Hours and CRI may vary from one lamp manufacturer to another.  Also, this data is for the most  commonly used types of these lamps.  Some lamp manufacturers also offer High Pressure Sodium, Metal Halide and Pulse Start Metal Halide lamps in versions that are more environmentally friendly, have improved Color Rending (CRI), or have coated envelopes.  See our Industry Links  page to find the websites of major lamp manufacturers for detailed information.
 **It is commonly estimated in the lighting industry that Induction Lighting will replace approximately twice it's wattage of Metal Halide.  For example, the light output of 100W of Induction equates to approximately 200W of Metal Halide.
***Each 15W LED module equates to approximately 70W of Metal Halide. Each 7.5W LED module equates to approximately 50W of Metal Halide.
 

MODEL CODE LEGEND (Choose one Code from each column.)
MODEL

LAMP TYPE

 WATTS

BALLAST / DRIVER TYPE

 VOLTS LAMP BASE FINISH LAMP
WP15  H = High
       Pressure
       Sodium		 35, 50, 70, 100, 150.  R = Magnetic Reactor NPF 120 Leave Blank. BZ = Bronze

WH =
White

L = Lamp
Included.
  
Leave
Blank
if not 
required.
50, 70,
100, 150.		  Q =  Quad-Tap Magnetic
         HX-HPF		 120, 208,
240 or 277.

(277 is
the default
voltage.)
 M = Metal Halide 50, 70.
100 Leave Blank
for Medium.
MG = Mogul
 P = Pulse Start
       Metal Halide		 150

 F = Compact
       Fluorescent

26, 32, 42,
52, 64, 84.		  E = 120 to 277 Multi-Volt
       Electronic HPF		 Leave Blank.

 I = Induction

 40  U = 120 to 277 Universal
       (Multi-Volt) Electronic		 5 = 5000K

 L = LED Module

 1X7H, 2X7H,
1X15, 2X15		  Q = 120V to 277V Multi-Volt
        Electronic Driver

 2 = 2700K
 3 = 3000K
 4 = 4000K

 
EXAMPLES OF COMPLETE ORDERING CODES:
WP15-H70-R120-BZ-L WP15-P150-Q208-BZ-L WP15-M100-Q277-MG-BZ-L
WP15-F52-E-BZ-L WP15-I40-U-BZ-5 WP15-L2X15-Q-BZ-4
Add Accessory Codes to end of Fixture Ordering Code.

 

SPECIFICATIONS
 SAFETY LISTING  CSA Listed as Suitable for Wet Locations.
 HOUSING &
 LENS FRAME		  Die Cast Aluminum with Chromate Conversion Coating for enhanced durability.
 Secured together with two hinges and stainless steel screws.
 LENS  Heat-resistant Molded Borosilicate Clear Prismatic Glass.
 LENS GASKETING  Silicone.
 REFLECTOR  Dimpled Semi-Specular Anodized Aluminum.
 MOUNTING  Cast-in template for direct mounting to 4" recessed outlet box, or use 1/2" N.P.T. coin plugs on
 top and sides of housing to accept surface conduit.
 LAMPHOLDERS  H.I.D.:  Porcelain 4KV pulse rated medium base or 5KV pulse rated mogul base.
            Both sizes have s nickel-plated screw shell.
 Compact Fluorescent:  Plug-in type.  Accepts 26W, 32W and 42W lamps.
 Induction & LED:  Support Brackets.
 LAMP
 		  H.I.D. and Compact Fluorescent:  Optional.  Positioned horizontally.
 Induction & LED:  Included.  4000K is the LED default Kelvin Color Temperature.
 LED MODULE(S)




 

 Die Cast Aluminum.  IP66 (Total Ingress Protection against Dust.  Protected Ingress against
 strong jets of water.  Overall excellent weatherproof protection.) Choice of 2700K, 3000K, 4000K
 Color Temperature. No mercury or lead.  Extremely low IR (Infrared Heat Radiation) and UV
 (Ultraviolet Radiation) in beam. As for light output, each 7.5W LED module equates to
 approximately 50W of Metal Halide and each 15W LED module equates to approximately 70W
 of Metal Halide.  

 FINISH  Textured Bronze (BZ) Polyester Powder Paint.  Custom colors available.
 ACCESSORIES

 		  Side Cutoff (WP15-GS)  Dark Sky Full Cutoff (WP15-FC)
 Wire Guard (WP15-WG)  Lens Guard (WP15-LG)
 110V to 130V Button Style Photocell -
 Field Installed (P18100)		  208V to 277V Button Style Photocell -
 Field Installed (P18102)
 110V to 130V Pencil Style Photocell -
 Field Installed (P18110) 		  208V to 277V Pencil Style Photocell -
 Field Installed (P18112) 
 Single Fusing (SF)
 120V to 277V Emergency Compact Fluorescent Battery Backup (3EB120277) 
 PHOTOMETRICS
 		  Selected Models available via e-mail in .pdf format and/or .ies format.
 Contact us with your request.
 WAREHOUSES  Tampa FL - Cerritos CA - Walden NY - Vancouver WA - Memphis TN.


Notes:

1.  If you require a fixture with a voltage, lamp or ballast not listed above, please contact us.
2.  To print this page in typical Portrait View, Click on FILE > PRINT PREVIEW.  In the drop boxes at the top of the screen, select ONLY THE FRAME SELECTED and SHRINK TO FIT.  This will eliminate the website page header and slightly shrink the margins so that everything on the page(s) will print.  Each operating system has it's own way of accomplishing this.   

Top of Page

Kelsey-Kane Lighting Mfg. Co.
4541 NE 11th Avenue, Fort Lauderdale, Florida 33334 USA
Phone:  954-772-3187, Fax:  954-772-8468
e-mail:  info@kelsey-kane.com