WPS40 SERIES:  LARGE SLIMLINE WALL PACKS > H.I.D. & LED
 
MAXIMUM WATTAGE APPLICATIONS Click Photos to Enlarge. DIMENSIONS

High Pressure Sodium: 400W

Pulse Start Metal Halide:  400W

LED:  4 X 15W

- Security -

-Perimeter-

Height:  18-3/4 inches

Width:  16-3/4 inches

Depth:  8 inches


DESCRIPTION:  These large weatherproof Wall Packs have a slim 8-inch profile yet will hold up to 400W of High Pressure Sodium, 400W of Pulse Start Metal Halide or (4) 15W LED Modules.  This type of fixture is typically used as exterior perimeter lighting on commercial buildings.  Includes installer friendly mounting plate with integral electrical box and built-in level.
 

MODEL CODE (Partial)
See Legend below
to complete code.

LAMP & BALLAST DATA
LAMP / MODULE
TYPE		 LAMP
BASE		 WATTS INITIAL
LUMENS*		 LAMP
HOURS*		 CRI* VOLTS BALLAST/
DRIVER
TYPE
 WPS40-H100-Q

High Pressure
Sodium

Mogul

 100    9,500

24,000+

 22

Quad-Tap:
120,
208,
 240,
277.
(277 is
the default
voltage.)

 Magnetic HX-HPF
 WPS40-H150-Q 150   16,000
 WPS40-H250-Q 250 28,500

 Magnetic
 CWA
 WPS40-H400-Q 400 50,000
 WPS40-P150-Q

 Pulse Start
 Metal Halide

 150 14,000

15,000

 65

Magnetic
HX-HPF

 Magnetic
 CWA
 WPS40-P250-Q 250 25,000

20,000
 WPS40-P320-Q 320 32,500
 WPS40-P350-Q 350 37,000
 WPS40-P400-Q 400 40,000
 WPS40-L2X7H-Q (2) LED Modules Support
Brackets		 2 X 7.5 1,000** 50,000 80 120 to 277
Multi-Volt		 Electronic
Driver
 WPS40-L3X7H-Q (3) LED Modules 3 X 7.5 1,500**
 WPS40-L4X7H-Q (4) LED Modules 4 X 7.5 2,000**
 WPS40-L2X15-Q (2) LED Modules 2 X 15 1,400**
 WPS40-L3X15-Q (3) LED Modules 3 X 15 2,100**
 WPS40-L4X15-Q (4) LED Modules 4 X 15 2,800**


*Initial Lumens, Lamp Hours and CRI may vary from one lamp manufacturer to another.  Also, this data is for the most  commonly used types of these lamps.  Some lamp manufacturers also offer High Pressure Sodium and Metal Halide lamps in versions that are more environmentally friendly, have improved Color Rending (CRI), or have coated envelopes.  See our Industry Links  page to find the websites of major lamp manufacturers for detailed information.
**Each 15W LED module equates to approximately 70W of Metal Halide. Each 7.5W LED module equates to approximately 50W of Metal Halide.
 

MODEL CODE LEGEND (Choose one Code from each column.  Volts and Lamp may be exluded.)
MODEL LAMP TYPE WATTS BALLAST TYPE VOLTS FINISH LAMP
WPS40  H = High Pressure
       Sodium		 100, 150.  Q = Quad-Tap Magnetic HX-HPF 120,
208,
240,
277.
(Default
is 277.)		 BZ =
Bronze

 L = Lamp
       Included.
  
 Leave Blank
 if not required.
250, 400.  Q = Quad-Tap Magnetic CWA
 P = Pulse Start
       Metal Halide		 150  Q = Quad-Tap Magnetic HX-HPF
250, 320,
350, 400.		  Q = Quad-Tap Magnetic CWA
 L = LED Modules 3X7H, 4X7H,
2X15, 3X15,
4X15		  Q = 120V to 277V
       Electronic Driver		 Leave
Blank.

 2 = 2700K
 3 = 3000K
 4 = 4000K  

 
EXAMPLES OF COMPLETE ORDERING CODES:
WPS40-H250-Q120-BZ-L WPS40-P150-Q277-BZ WPS40-P400-Q240-BZ-L WPS40-L4X15-Q-BZ-4
Add Accessory Codes to end of Fixture Ordering Code.
 

SPECIFICATIONS
 SAFETY LISTING  CSA Listed as Suitable for Wet Locations.
 HOUSING &
 LENS FRAME		  Die Cast Aluminum with Chromate Conversion Coating for enhanced durability.
 Secured together with two hinges and stainless steel screws.
 LENS  Heat-resistant Borosilicate Molded Prismatic Glass.
 LENS GASKETING  Silicone.
 REFLECTOR  Aluminum.
 LAMPHOLDER  H.I.D.:  Porcelain 5KV pulse-rated mogul base with nickel-plated screw shell.
 CONDUIT ACCESS  1/2" N.P.T. Coin Plugs with O-rings on sides to accept conduit or Photocell..
 MOUNTING PLATE
 (Pictured Above.)		  Included.  Has integral electrical box.  Allows one person to install "two hands free" for final
 installation and wiring.  Built-in level for straight mounting.
 FINISH  Textured Bronze Polyester Powder Paint. Custom colors available.
 LAMP  H.I.D.:  Optional.
 LED MODULES




 

 Die Cast Aluminum.  IP66 (Total Ingress Protection against Dust.  Protected Ingress against
 strong jets of water.  Overall excellent weatherproof protection.) Choice of 2700K, 3000K, 4000K
 Color Temperature.  No mercury or lead.  Extremely low IR (Infrared Heat Radiation) and UV 
 (Ultraviolet Radiation) in beam.  As for light output, each 7.5W LED module equates to
 approximately 50W of Metal Halide and each 15W LED module equates to approximately 70W
 of Metal Halide.
 ACCESSORIES  110V to 130V Button Style Photocell -
 Field Installed (P18100)		  208V to 277V Button Style Photocell -
 Field Installed (P18102)
 110V to 130V Pencil Style Photocell -
 Field Installed (P18110) 		  208V to 277V Pencil Style Photocell -
 Field Installed (P18112) 
 Glare Shield (GS)  Single Fusing (SF)
 Wire Guard (WG)
 Quartz Restrike Module (No lamp) for H.I.D. Models (QRS)
 PHOTOMETRICS
 		  Selected Models available via e-mail in .pdf format and/or .ies format.
 Contact us with your request.
 WAREHOUSES  Tampa FL - Cerritos CA - Walden NY - Vancouver WA - Memphis TN.


Notes:

1.  If you require a fixture with a voltage, lamp or ballast not listed above, please contact us.
2.  To print this page in typical Portrait View, Click on FILE > PRINT PREVIEW.  In the drop boxes at the top of the screen, select ONLY THE FRAME SELECTED and SHRINK TO FIT.  This will eliminate the website page header and slightly shrink the margins so that everything on the page(s) will print.  Each operating system has it's own way of accomplishing this.   

Top of Page

Kelsey-Kane Lighting Mfg. Co.
4541 NE 11th Avenue, Fort Lauderdale, Florida 33334 USA
Phone:  954-772-3187, Fax:  954-772-8468
e-mail:  info@kelsey-kane.com