FL45-Q DIRECTIONAL FLOOD SERIES > EasyLED ARRAY
10-1/4" Height X 9" Width X 7-1/4" Depth
|
Pictured with Prismatic Lens and Swivel Mount.
|
16" Height X 9" Width X 7-1/4" Depth
|
DESCRIPTION: Deluxe Floodlight with 1/2" NPT adjustable Swivel or Slipfitter. Ground mount, wall mount or pole mount. The 37.2W EasyLED Array replaces up to 175W of Metal Halide. Choice of optics, lens and mounting device.
EasyLED ARRAY DATA
|
FIXTURE CODE (Partial)
FL45-Q-F-1X37-5K-C
FL45-Q-F-1X37-5K-P FL45-Q-I-1X37-5K-C |
ARRAY WATTS
37.2
37.2 37.2 |
SYSTEM WATTS
41
41 41 |
ARRAY LUMENS
4,582
4,582 4,101 |
DELIVERED LUMENS
3,390
Not Available. 3,271 |
HOURS
50,000
50,000 50,000 |
CRI
73
73 81 |
MODEL CODE LEGEND
|
FIXTURE
|
LED ARRAY
|
OPTICS
|
NO. X WATTS
|
ELECTRONIC DRIVER
|
KELVIN
|
LENS TYPE
|
MOUNTING
|
FINISH
|
|
FL45
|
Q = EasyLED
|
F = Medium Flood
I = Spot Flood
|
1X37 =
(1) 37W Array |
U = 120V to 277V;
50/60Hz; Dimmable. H = 347V/480V; 50/60Hz; Dimmable. |
5K = 5000K
|
P = Prismatic
C = Clear C = Clear
|
SW = Swivel
SF = Slipfitter |
BZ = Bronze
|
MODEL CODE EXAMPLES
|
FL45-Q-F-1X37-U-5K-P-SF-BZ
|
FL45-Q-F-1X37-U-5K-C-SW-BZ
|
FL45-Q-I-1X37-H-5K-C-SF-BZ
|
SPECIFICATIONS
|
LISTINGS & RATINGS
|
Safety: CSA Listed as Suitable for Wet Locations.
Weatherproofing: IP65 Design: Model FL45-Q-F-1X37-U-5K-C-(SW or SF) is DesignLight Consortium (DLC) Qualified. |
|
HOUSING & LENS FRAME
|
Die Cast Aluminum Housing with a Hinged Lens Frame. Stainless Steel Hardware.
1/2" NPS Coin Plug with Gasket on top panel of Housing. |
|
MOUNTING DEVICES
|
Swivel (Knuckle):
- Die Cast Aluminum. - Adjustable. - 1/2" NPS Threads. - Stainless Stell Hardware. - Zinc Coated Stamped Steel Lock Nut. 
Slipfitter (FL73SFX):
- Die Cast Aluminum. - Adjustable, with Angle Indicator. - Slips 2-3/8" Tenon. - Stainless Steel Hardware. - Built-in Wiring Compartment. - 1/2" NPS Coin Plug entrance to accept photocell. |
|
LENS
|
Choice of Clear, Flat,Tempered Glass (C) or Prismatic, Flat, Tempered Glass (P).
Use the Prismatic Glass only with the Medium Flood (F) Optics. |
|
LENS GASKETING
|
Silicone.
|
|
EasyLED ARRAY
|
Samsung LEDs are mounted on an Aluminum Board with Copper Tracings for maximum heat transfer.
Designed solely for the FL45-Q to optimize light output. The Medium Flood (F) array emits a 115 Degree circular light distribution pattern. The Spot Flood (I) array emits a 30 Degree circular light distribution pattern. |
|
FINISH
|
Textured Architectural Bronze Powdercoat over a Chromate Conversion Coating which ensures a longer fixture life through enhanced corrosion protection and stronger powdercoat bonding.
Custom colors available upon request. |
|
MOUNTING ACCESSORIES
|
Post-Top Fitter (FL-PTF):
- Enables post top mounting of small and medium-size floodlights. - Die Cast Aluminum with Bronze Powdercoat FInish. - (3) 1/2" NPS Coin Plugs. (One on Top, Two on Sides opposite of each other.) - Affixes to Pole / Tenon with (4) Stainless Steel Set Screws. - Slips 2-3/8" to 3-1/2" Poles / Tenons. 
Ground Stake (FL-STK):
- 19" Height Heavy-Duty Black Plastic with Round Profile. - Adjustable Black Plastic Stabilizers with 9" Width and 2-1/4" Height. - Built-in Wiring Compartment in Top Section of Stake has a 1/2" NPS Die Cast Aluminum Fitting to accept a 1/2" NPS fixture Swivel (Knuckle) and two 1/2" NPS Coin Plugs for surface and through-wiring applications. Wiring Compartment Dimensions are a Top Diameter of 3-1/2" and Height of 5-5/8". - This is a cleaner looking installation than using a die cast aluminum weatherproof box fed by conduit. The conduit is hidden and protected inside the stake. Most ground stakes on the market do not have an internal wiring compartment so that the wiring and connectors are left unprotected inside the stake. Having an internal wiring compartment ensures that the wiring and connectors are away from out side elements. |
|
OPTICAL DEVICES
|
3-Sided Glare Shield (FL45-GS):
- Reduces beam spread and cuts off glare on three sides of the fixture. Mount in reverse to become a Back Cutoff. - 1.55mm Thick Stamped Aluminum. - Bronze Powdercoat Finish. - Affixes to Lens Frame with (4) Stainless Steel Screws. 
Lens Guard (FL45-LG):
- Aids to protect the Glass Lens from Vandalism. - Clear Polycarbonate. - Affixes to Lens Frame with (4) Stainless Steel Screws. 
Wire Guard (FL45-WG):
- Aids to protect the Glass Lens from Vandalism. - Stainless Steel Construction. - Affixes to Lens Frame with (4) Stainless Steel Screws. |
|
PHOTOMETRICS
|
Available via e-mail in .pdf and .ies formats in selected fixtures. Contact us with your request.
|
|
WAREHOUSES
|
Tampa FL - Memphis TN - Walden NY - Cerritos CA - Vancouver WA.
|
All Data and Specifications listed above are subject to change without notice.