FLOODLIGHTS > DIRECTIONAL > LED COB (CHIP-ON-BOARD)
FB1-C3 SERIES >
- Wet Location Directional Bullet.
- 1 X 20W Cool Copper LED COB.
- Replaces up to 100W of HID lighting.
- 120V to 277V Dimmable Driver, or
Low Voltage (12V to 17V, 50/60Hz)
Non-Dimmable Driver. 
- 4100K.
- 25, 70 or 100 Degree Beam Spread.
​- Knuckle (Swivel) Mount or Pendant Mount with 1/2" NPS Conduit.
CLICK BUTTON BELOW TO VIEW:
FL20-L SERIES >
- Wet Location Directional Flood.
- 1 X 18W LED COB (Chip-on-Board.).
- Replaces up to 70W of HID lighting.
- 120V to 277V Dimmable Driver, or
Low Voltage (12V to 17V, 50/60Hz)
​Non-Dimmable Driver.
- 4000K or 5000K.
- Wide Flood Beam Spread.
​- Adjustable Knuckle (Swivel) Mount.
CLICK BUTTON BELOW TO VIEW:
TV2-C3 TRAVERSE SERIES >
- Wet Location Directional Flood.
- 2 X 10W or 2 X 20W LED Cool Copper COBs.
​- Replaces up to 175W of HID lighting.
- 120V to 277V Dimmable Driver.
- Low Voltage (12V to 17V, 50/60Hz)
Non-Dimmable Driver available only for
​the 2 X10W version.
​- 4100K.
​- Wide Flood Beam Spread.
- Adjustable Knuckle (Swivel) Mount.
CLICK BUTTON BELOW TO VIEW:
TV3-C3 TRAVERSE SERIES >
- Wet Location Directional Flood.
- 4 X 15W Cool Copper LED COBs replace 
up to 250W of HID lighting.
- 4 X 20W LED Cool Copper COBs replace
up to 400W of HID lighting.
​- 4100K.
- Mounting Choice:  Knuckle (Swivel), Slipfitter, 2-Piece Swivel Bracket, 6", 10" or 12" Extruded Mounting Arm.
Picture
Pictured with Slipfitter Mounting Device.
CLICK LINK BELOW TO VIEW:
All information listed above is subject to change without notice.