POLES > DECORATIVE > FLUTED AND SMOOTH > ALUMINUM > 4" DIAMETER > ANCHOR BASE & DIRECT BURIAL
PARF416ABB DECORATIVE SERIES >
- 16 Ft. Fluted Extruded Aluminum Pole.
- 4" O.D. X 11 Gauge (.120) Wall Thickness.
- Anchor Base.
- Gasketed Hand Hole Cover.
- 18" Anchor Bolts and Templates Included.
​- 3" Removable Reducing Tenon Included.
- Optional Base Covers:  Square Formed and Rivieted Aluminum, or 2-piece Wrap-Around Decorative Die Cast Aluminum.
- Black.Powdercoat Finish.
​- Custom Lengths available.
CLICK BUTTON BELOW TO VIEW:
PARF422DBB DECORATIVE SERIES >
- 22 Ft. Fluted Extruded Aluminum Pole.
- 4" O.D. X 11 Gauge (.120) Wall Thickness.
- Direct Burial.
- Gasketed Hand Hole Cover.
- 3" Removable Reducing Tenon Included.
- Optional Base Covers:  Square Formed and Riveted Aluminum, or 2-piece Wrap-Around Decorative Die Cast Aluminum.
- Black Powdercoat FInish.
- Custom Lengths available.
CLICK BUTTON BELOW TO VIEW:
PARS420ABB DECORATIVE SERIES >
- 20 Ft. Smooth Extruded Aluminum Pole.
- 4" O.D. X 11 Gauge (.120) Wall Thickness.
- Anchor Base.
- Hand Hole with Gasketed Cover.
- 3" Removable Reducing Tenon Included.
- Optional Base Covers:  Square Formed and Riveted Aluminum, or 2-piece Wrap-Around Decorative Die Cast Aluminum.
- Black Powdercoat FInish.
- Custom Lengths available.
CLICK BUTTON BELOW TO VIEW:
DECORATIVE POLE ARMS, BRACKETS & BASE COVERS
PADAB DECORATIVE POLE ARM >
- Dual-Head.
- Aluminum, with Stainless Steel Hardware.
- Black Powdercoat FInish.
- Fits 3" Tenon on PARF4 Decorative Poles (above).
- Accepts 3" Diameter Fixture Fitters.
- 13" Height X 43" Overall Width.
CLICK BUTTON BELOW TO VIEW:
PWASAB DECORATIVE BRACKET >
- Single-Head Wall Bracket.
- Aluminum, with Stainless Steel Hardware.
- Black Powdercoat FInish.
- Accepts 3" Diameter Fixture Fitters.
- 10" Height X 15" Overall Length.
CLICK BUTTON BELOW TO VIEW:
PB24A4B DECORATIVE BASE COVER >
- 2-piece Wrap-Around.
- Die Cast Aluminum, with Stainless Steel Hardware.
- Black Powdercoat FInish.
- Fits PARF4 Decorative Poles (above).
- 24" Height X 12" Diameter.
CLICK BUTTON BELOW TO VIEW:
PARF4BCB BASE COVER >
- 2-piece Square Formed.
- Aluminum, with Stainless Steel Hardware.
- Black Powdercoat FInish.
- Fits PARF4 Decorative Poles (above).
- 10-3/4" Length X 11" Width. X 4" Height.
CLICK BUTTON BELOW TO VIEW:
POLES > STRAIGHT > ALUMINUM > ANCHOR BASE > 4" & 5" DIAMETER ROUND
PSRA 4" ROUND POLE SERIES >
- Round Pole Shaft is One-Piece Extruded 6063 Aluminum Alloy with T6 Temper.
- 4" Diameter.  5mm Wall Thickness.
- 10', 12', 14', 16', 18 ' or 20' Length.
- Anchor Base with Bolts and 2-Piece Formed Aluminum Base Cover included.
- Hand Hole with Cover.
- Mountings:  Side Drilled or Add Choice of 2 Single Vertical Pole Top Tenons.
- Black Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PSRA 5" ROUND POLE SERIES >
- Round Pole Shaft is One-Piece Extruded 6063 Aluminum Alloy with T6 Temper.
- 5" Diameter.  5mm Wall Thickness.
​- 16', '18', 20' or 25' Length.
- Anchor Base with Bolts and 2-Piece Formed Aluminum Base Cover included.
- Hand Hole with Cover.
- Mountings:  Side Drilled or Add Choice of 2 Single Vertical Pole Top Tenons.
- Black Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
POLES > STRAIGHT > STEEL > ANCHOR BASE > 4" & 5" SQUARE
PSSS 4" X 4' X 7GA POLE SERIES >
- High-Strength Straight Steel Pole.
- 4" X 4" X 7 Gauge (.180) Wall Thickness.
- 25' Length, or Custom Cut to Length.
- Anchor Base with Bolts and 2-Piece Formed Steel Base Cover Included.
- Hand Hole with Gasketed Cast Iron Cover.
- Mountings:  Side Drilled or add Pole-Top Single Vertical Tenon.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PSSS 4" X 4" X 11GA POLE SERIES >
- High-Strength Straight Steel Pole.
- 4" X 4" X 11 Gauge (.120) Wall Thickness.
- 20' Length, or Custom Cut to Length.
- Anchor Base with Bolts and 2-Piece Formed Steel Base Cover Included.
- Hand Hole with Gasketed Cast Iron Cover.
- Mountings:  Side Drilled, or add Pole-Top Single Vertical Tenon.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PSSS 5" X 5" X 7GA POLE SERIES >
- High-Strength Straight Steel Pole.
- 5" X 5" X 7 Gauge (.180) Wall Thickness.
- 30' Length, or Custom Cut to Length.
- Anchor Base with Bolts and 2-Piece Formed Steel Base Cover Included.
- Hand Hole with Gasketed Cast Iron Cover.
- Mountings:  Side Drilled or add Pole-Top Single Vertical Tenon.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
BULLHORNS
PRS-D-180-BH-Z >
- 180 Degrees Double Round.
- 2 Vertical 2-3/8" Diameter Tenons on top
to accept Area Lights.
- Slips 2-3/8" Vertical Tenon
​[PSS(4 or 5)-S-VT-Z] on PSS4 & PSS5 Poles (above).
​- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PRS-TR-180-BH-Z >
- 180 Degrees Triple Round.
​- 3 Vertical 2-3/8" Diameter Tenons on top
​to accept Area Lights.
- Slips 2-3/8" Vertical Tenon
[PSS(4 or 5)-S-VT-Z] on PSS4 & PSS5 Poles (above).
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PRS-Q-180-BH-Z >
- 180 Degrees Quad Round.
- 4 Vertical 2-3/8" Diameter Tenons on top
​to accept Area Lights.
- Slips 2-3/8" Diameter Vertical Tenon
[PSS(4 or 5)-S-VT-Z] on PSS4 & PSS5 Poles (above.).
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
VERTICAL TENON BRACKETS > FOR 4" & 5" SQUARE POLES
PSS(4 or 5)-S-VT-Z >
- Single Vertical 2-3/8" Diameter Tenon to accept Area Lights or Vertical Tenon Brackets and Horizontal Spoke Tenon Brackets listed below.
- Square Base recesses into PSS(4 or 5) Steel Pole (above).
- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PSS(4 or 5)-T-VT-Z >
- Twin Vertical 2-3/8" Dia. Tenons, to accept Area Lights, on top of a Square Extrusion with End Caps in a 180 Deg. configuration.
- Square Base Slips 2-3/8" Diameter Vertical Tenon [PSS(4 or 5)-S-VT-Z ] on PSS(4 or 5) Steel Pole (above).
- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PSS(4 or 5)-TR-VT-Z >
- Triple Vertical 2-3/8" Dia.Tenons, to accept Area Lights, on top of a Square Extrusion with End Caps in a 180 Deg. configuration.
- Square Base slips 2-3/8" Diameter Vertical Tenon [PSS(4 or 5)-S-VT-Z on PSS(4 or 5) Steel Pole (above).
- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PSS(4 or 5)-Q-180-VT-Z >
- Quad Vertical 2-3/8" Dia.Tenons, to accept Area Lights, on top of a Square Extrusion with removable End Caps in a 180 Degree configuration.
- Square Base slips 2-3/8" Diameter Vertical Tenon [PSS(4 or 5)-S-VT-Z on PSS(4 or 5) Steel Pole (above).
- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
HORIZONTAL SQUARE TENON BRACKETS > FOR 4" & 5" SQUARE POLES
PSS(4 or 5)-T-180-HT-Z >
- Twin Horizontal 2-3/8" Diameter Tenons,
​to accept Area Lights, configured at 180 Degrees on sides of a Square Extrusion with removable spring-loaded Cap.
- Square Base recesses into PSS(4 or 5) Steel Pole (above).
- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PSS(4 or 5)-T-90-HT-Z >
- Twin Horizontal 2-3/8" Diameter Tenons,
to accept Area Lights, configured at 90 Degrees on sides of a Square Extrusion with removable spring-loaded Cap.
- Square Base recesses into PSS(4 or 5) Steel Pole (above).
- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PSS(4 or 5)-TR-90-HT-Z >
- Triple Horizontal 2-3/8" Dia. Tenons,
​to accept Area Lights, configured at 90 Degrees on sides of a Square Extrusion with removable spring-loaded Cap.
- Square Base recesses into PSS(4 or 5) Steel Pole (above).
- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PSS(4 or 5)-Q-90-HT-Z >
- Quad 2-3/8" Dia. Tenons, to accept Area Lights, configured at 90 Degrees on sides of a Square Extrusion with removable spring-loaded Cap.
- Square Base recesses into PSS(4 or 5) Steel Pole (above).
- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
 HORIZONTAL SPOKE TENON BRACKETS > FOR 4" & 5" POLES
PTSB1SZ >
- Single Horizontal 2-3/8" Diameter Spoke Tenon, to accept Area Lights, on a Round Extrusion with Dome Cap.
- Round Base slips 2-3/8" Diameter Vertical Tenon [PSS(4 or 5)-S-VT-Z on PSS(4 or 5) Steel Pole (above).
- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PTSB2180SZ >
- Double Horizontal 2-3/8" Diameter Spoke
Tenons, to accept Area Lights, on opposite sides of a Round Extrusion with Dome Cap.
- Round Base slips 2-3/8" Diameter Vertical Tenon [PSS(4 or 5)-S-VT-Z on PSS(4 or 5) Steel Pole (above).
- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PTSB290SZ >
- Double Horizontal 2-3/8" Diameter Spoke
Tenons, to accept Area Lights, configured
​at 90 Degrees on a Round Extrusion with Dome Cap.
- Round Base slips 2-3/8" Diameter Vertical Tenon [PSS(4 or 5)-S-VT-Z on PSS(4 or 5) Steel Poles (above).
​- Stainless Steel Hardware.
- Bronze Powdercoat Finish.- .
CLICK BUTTON BELOW TO VIEW:
PTSB390SZ >
- Triple Horizontal 2-3/8" Diameter Spoke Tenons, to accept Area Lights, configured
​at 90 Degrees on a Round Extrusion with Dome Cap.
- Square Base slips 2-3/8" Diameter Vertical Tenon [PSS(4 or 5)-S-VT-Z on PSS(4 or 5) Steel Pole (above).
- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PTSB3120SZ >
- Triple Horizontal 2-3/8" Diameter Spoke Tenons, to accept Area Lights, configured
at 90 Degrees on a Round Extrusion with Dome Cap.
- Round Base slips 2-3/8" Diameter Vertical Tenon [PSS(4 or 5)-S-VT-Z on PSS(4 or 5) Steel Pole (above).
​- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PTSB490SZ >
- Quad Horizontal 2-3/8" Diameter Spoke Tenons, to accept Area Lights, configured
at 90 Degrees on a Round Extrusion with Dome Cap.
- Round Base slips 2-3/8" Diameter Vertical Tenon [PSS(4 or 5)-S-VT-Z on PSS(4 or 5) Steel Pole (above).
​- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
TENON ADAPTOR
PTASUNV >
- Slips 2-3/8" Diameter Vertical Tenon.
- Accepts FLEM Extruded Aluminum Mounting Arms.
- Removable Spring-Loaded
​Polycarbonate Cap.
- Stainless Steel Hardware.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
WALL BRACKETS
PRSWMBZ >
- Wall Mount Bracket.
- 2-/3/8" Tenon.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
PRSWMB90Z >
- 90 Degree Wall Mount Bracket.
- 2-3/8" Tenon.
- Bronze Powdercoat Finish.
CLICK BUTTON BELOW TO VIEW:
All information listed above is subject to change at any time.